Tools

-Contains the perfect assortment of factory sized metric bolts, nuts, cotter pins, rivets, and washers for late model sport and utility ATVs including Honda, Yamaha, Kawasaki, and Suzuki.
-Comes in a divided organizer so you won't have to hunt for the piece that you need.
-The perfect companion for any tool box.
-High quality 8.8 and 12.9 grade bolts are quenched and tempered to ensure durability.
-Kit Includes: (14) Flange Nuts, (14) Nylock Nuts, (8) M10 Locking Flange Lug Nuts, (8) Adaptors to convert lug nuts to tapered, (4) Pan Head Screws, (4) Flush Mount Screws, (8) Allen Head Carburetor Bolts, (8) Lock Washers for Carburetor Bolts, (24) Button Head Bolts, (10) Fairing Bolts, (16) Flat Washers, (12) Fender Washers, (18) Cotter Pins, (24) M6 8mm Hex Head Flange Bolts, (40) M6 10mm Hex Head Flange Bolts, (8) M8 10mm Hex Head Flange Bolts, (8) M8 Two-Stage Pry Nylon Rivets, (2) M6 Three-Stage Push Nylon Rivets, (6) M8 Three-Stage Push Nylon Rivets.

-Strong 8.8 grade 8mm x 1.25 thread steel bolts.
-O.E.M. flange design with 10mm hex head.
-Perfect for motor mounts, triple clamps, brake calipers, exhausts, sub frames, axle pinch bolts, and many more.
-Kit comes with a six compartment plastic case and the following bolts: 10 8x20, 10 8x25, 10 8x30, 8 8x40, and 6 8x45mm bolts (52 pieces total).

-Strong 8.8 grade 6mm thread steel bolts.
-Flange design with 8mm hex head.
-Kit comes with a six compartment plastic case and 25 of each of the following bolts: 6x12, 6x16, 6x20, 6x25, 6x30, and 6x35 (150 bolts!)
-Individual sizes can be purchased separately in bags of 25.

-Factory sized 6mm or 8mm nylon push rivets.
-Replaces OEM nylon rivets found on many Kawasaki and Suzuki ATVs.
-Sold in packs of ten.

-Factory sized 6mm or 8mm nylon push rivets.
-Replaces OEM nylon rivets found on many Kawasaki and Suzuki ATVs.
-Sold in packs of ten.

-Plier has reversible attatchments to install or remove both internal and external snap rings. Four reversible heads to optimize snap ring fitment (180 degree and 45 degree heads with 1.2mm tips, and 180 degree and 90 degree heads with 1.5mm tips.
-Made from durable steel construction with rubber coated handles and measures 6 1/4" long.

-Made for most two-stroke water cooled motorcycles and ATVs .
-Fits 13/16" spark plugs.

-Special thin wall design for water-cooled 4-strokes with 5/8" (16mm) hex spark plugs.
-Unique 2 step extension design that can move from a fixed position to a swivel.
-For use on models like the CRF450/250, TRX450R, YZ/WR250F/400F/426F/450F, YFZ450, DRZ400, KLX300, and more.

-Made for most two-stroke water cooled motorcycles and ATVs.
-Ratchet design for easy installation and removal of spark plugs.
-Fits 13/16" spark plugs

-High quality transparent polyurethane fuel line.
-Resists weathering, kicking, tearing, abrasion and impact.
-Contains no plasticizers that cause hardening.

-Quick disconnect feul couplings add convenience and ease of use. Simply press the thumb latch and two halves separate. Connection is just as easy just press the two halves together.
-Viton o-rings for a leak free connection.
-Used on race bikes to make tank removal quick and easy.
-Can be used with any type of fuel.
-Will work with 1/4" or 5/16" I.D. fuel line.

Designed to rivet chain links to form an endless chain such as cam and drive chains.

Easily breaks the chain in seconds
Quality construction
Fits all chain sizes

-Makes press fit master link side plate installation simple and accurate
-Fits most 520 and 530, standard, O-ring, and X-ring chains
-Compact design perfect for the toolbox or fanny pack
-Allen wrench included.

-Aids in the servicing and bleeding of hydraulic brakes.
-Check valve allows fluid and air to escape while preventing air from re-entering the system.
-Makes bleeding brakes a one person job.

-Versatile wrench that includes hex sizes for the front axle, rear axle and water-cooled 2-stroke spark plug.
-Wrench features a 6-point design for axle nuts to ensure a secure grip.
-Compact design perfect for fanny packs or toolboxes.
-Constructed of hardened steel with a chrome finish for durability.

-Used to safely install/remove motorcycle internal hex front axles.
-Ensures proper fork alignment on the axle to prevent fork binding.
-One-piece tool that fits 17, 19, 22 and 24mm internal hex axles.
-3/8"

People who bought this item also bought:

-Will not fit the Raptor 660.
-A must for assembling vertically split crankcases.
-Safely and easily pulls crank assembly into crankcase.
-Heavy-duty steel construction.
-Includes both male and femail M10x1.25mm and M12x1.25mm adaptors to attach to crank assembly.

-Used to hold the inner clutch hub, which is necessary for removal and installation of the clutch hub and clutch basket.
-8mm spanner pins on the back can also be used to hold flywheels, sprockets, gears, etc
-Adjustable jaws open up to 5 inches wide and are recommended for square tooth style hubs.

-Necessary tool for flywheel removal.
-27mm 1.0mm thread.

-Made from quality chrome vanadium steel.
-Deep socket design to fit most applications.
-310mm length.

-Three adjustable table heights enable the use on just about any off-road motorcycle.
-Lowered and lifted heights are adjustable from 11" to 14.5", 12" to 25.5", and 13" to 16.5".
-Easy lift and release lever.
-Constructed from light and durable aluminium.
-Features a rubber top pad.

-Clamps over the cable and the housing.
-Designed to be used with aerosol cable lube.
-Effortlessly injects lubricant through the entire cable housing.

-Easy-to-access reversible bits #1 & #2 Phillips tip, and 1/4" & 3/16" Flat tip.
-Built-in nut drivers 5/16" & 1/4" deep-reach.
-Ball/Spring retention shaft positive lock-in with handle.

-Compact design perfect for tool box or fanny pack
-Folding tool includes the following; #2 and #3 Philips, #3 and #6 screwdriver, 4mm, 5mm and 6mm, Allen wrenches
-Durable chrome vanadium tool construction with hard anodized aluminum sides

-The perfect tool set for light duty trail repairs that fits in your fanny pack
-Compact two-way ratchet is 115mm long and features a comfortable rubber coated handle
-Set includes: 8, 10, and 12mm six-point sockets, a socket extension, #2 Phillips and #2 slot-head screwdriver, and 4, 5 and 6mm Allen tips
-All attachments fit in convenient rubber holders

-A super trick Y shaped Allen set that is compact enough for a fanny pack
-Comes with 4, 5, 6 and 8mm allen ends

-A must for disassembling vertically split 2 and 4-stroke crankcases.
-Makes crankcase disassembly easy by safely pushing the crank assembly out of the case halves.
-Adjustable arms permit it to be used on a variety of bolt patterns.
-Includes both 8mm and 6mm mounting bolts.

-Three-way T-Handle wrench with removable sockets.
-1/4" drive works with any standard 1/4" drive sockets.
-Perfect size for fanny pack.
-Comes with 6, 8, 10, 12, 13mm sockets and #2 Philips.

-A super trick Y shaped Allen set that is compact enough for a fanny pack
-Comes with 8, 10 and 12mm sockets

High quality T-wrench set that features a sliding handle to allow additional torque and allow you to turn bolts in limited spaces.
-Set includes 8mm, 10mm, 12mm and 14mm wrenches that feature a deep socket design for optimal applications.
-Forged, heat-treated, and a polished chrome finish ensure durability.
-Each T-wrench has a 200mm handle and 310mm stem.

-Used to loosen or tighten the lower slotted steering stem nut.
-Eliminates having to use a hammer and screwdriver.
-Fits most bikes with 35-45mm slotted steering stem nuts.

-Durable T-wrenches that feature a short 185mm length and 140mm wide handle to better fit your toolbox.
-Set includes 8mm, 10mm, 12mm, 13mm, and 14mm wrenches that feature a deep socket design for optimal applications.
-Made frome quality chrome vanadium steel.

-Convenient low profile (5mm thick) design that allows access to the steering stem nut with the handlebars in place.
-12-point wrench features both 30mm and 32mm sizes to fit most steering nut applications.
-Compact design perfect for fanny packs or toolboxes.
-Constructed of hardened steel with a chrome finish for durability.

-L-handle wrench with 1/4" socket attachments on both ends is compact and perfect for trail packs.
-Made from hardened steel Chrome Vandium sockets.
-Includes 8,10,12mm sockets, screwdriver bit adaptor with #2 and #3 Phillips, and #2 and #3 flat head screwdriver bits.

-Two-piece tool set needed to remove the fork cap from the outer fork tube and Dual-Chamber compression body found on newer YZ's.

-Makes adjusting fork oil height simple and accurate.
-Aluminium measuring tube features laser-etched metric measuring marks with an adjustable locking height collar to ensure precise oil heights.
-Syringe sucks excess oil out quickly and efficiently.

-Steel fork cap wrench made to fit the large 46mm and 50mm caps found on most late model CR, CRF, KX, RM and RMZ forks.
-Call for applications