Control

Handguards protect your hands from roost and brush. *Can be positioned independently from levers. *Hand shields are made from durable, injection molded plastic and are replaceable. *Clamps are made from lightweight 6061 aluminum with a T6 heat treatment for added strength.

-Levers are made from durable die--cast aluminum.
-Most models have a brass bushing for smoother operation and longer wear.
-All levers match OEM specifications.

TUSK D-FLEX HANDGUARDS:
-Features replaceable aluminum bars and plastic shields.
-Designed with a large bend that provides exceptional brake and clutch lever clearance.
-Standard mounting is for 7/8" bars with big bar adaptors available by ordering separately.
-For Dirt Bikes only.
TUSK D-FLEX SPOILERS:
-Designed to add additional protection from the elements by adding extra coverage both above and below the original D-Flex sield.
-Easily attatches to the front of the D-Flex handguard.

-For trail riders.
-95mm x 790mm x 40mm (hight x length x pullback/sweep).
-Available in silver or black.
-Low sweep makes it comfortable to stand up while riding.
-At the grips they are 22mm further forward than most stock bars.

UNIVERSAL BIG BAR CLAMP:
-Design to fit into existing handlebar clamps and allow use of 1 1/8" big bars.
-Adds 3/4" high to handlebar bend.
CHUB BIG BAR:
-Oversized 1-1/8" handlebar is extremely strong and lighter than standard bars.
-Made from 7075 T-6 aluminum with a shot-peened anodized corrosion resistant finish.
-Features chemically applied graphics that won't peel off.
-Available in black or silver.

DUAL GASSER THROTTLES
A high performance thumb and twist throttle for your Quad/ATV handlebars.
Machined from aircraft grade aluminum and features a switch to enable use of three throttle options. Switch to Thumb throttle only. or Switch to Twist throttle only orSwitch to enable both !!!

TRAIL TECH OVERSIZED ATV HANDLEBARS:
- X-Bars are specifically designed to fit quads providing perfect ergonomics.
- X-Bars are ultra strong, reduce vibration and are made from heat treated 7075 aluminum.
TRAIL TECH HANDLEBAR CLAMPS:
- Designed for oversized Handlebars 1-1/8"
- Mounts directly to the stock steering stemFor most applications key switch and/or indicator lights are relocated into the clamp.

-High quality Chromoly tie rods that are much more durable than stock steel units.
-Designed for standard length A-Arms.
-Sold in pairs.

TUSK UNIVERSAL HANDLEBAR RAISER KIT:
-Adjustable 7/8" handle bar risers allow you to adjust the handle bar height for preferred personal comfort and control.
-Kit Includes hardened aluminum spacers to give an optional 20mm, 25mm, 30mm and 35mm height increase over stock
-Complete with chromoly steel bolts.
TUSK HANDLEBAR RISER KIT:
-Spacers increase handlebar height by 30mm (1.2 inches).
-Spacers are made from billet 6061 T-6 aluminum.
-Complete with strong 12.9 tensile strength Chromoly Steel bolts.
-Availablefor both standard 7/8" bars and oversized 1 1/8" bars.
TUSK T-10 HANDLEBARS:
-Constructed from heat treated T6 Aluminum.
-Laser etched centering marks in clamping area for precise installation.
-Knurling in key areas such as the clamp and grip area to prevent slipping.
-Vinyl crossbar pad included.
-Will not fit the Yamaha Raptor please use the specific handlebar for the Raptor.

TUSK SAFETY WIRE:
-Spool of stainless steel safety wire perfect for grips oranything else that needs to be safety wired.
-0.5mm thick and100 feet long.
TUSK SAFETY WIRE KIT:
-Kit includes a pair of safety wire pliers and a spool of wire.
-A professional way to install safety wire.
-Twists safety wire quickly and evenly with a pull of the handle.
-215mm length pliers include wire cutters.
-Spool of stainless steel safety wire perfect for grips or anything else that needs to be safety wired.
-Wire is 0.5mm thick and 100 feet long.

-Hanguards protect your hands from roost and brush.
-Can be positioned independently from levers.
-Hand shields are made from durable, injection molded plastic and are replaceable.
-Clamps are made from lightweight 6061 aluminum with a T-6 heat treatment for added strength.
-Clamps fit 7/8" and 1 1/8" bars.
-Shields, clamps and all necessary hardware included.
-Shields are also compatible with Tusk Aluminum Handguards.
-Both ATV and MC applications.

Replacement stainless steel tie-rods for stock or aftermarket a-arm sets. Use all OEM ends.

-Levers are made from durable die-cast aluminum.
-Most models have a brass bushing for smoother operation and longer wear.
-All levers match OEM specifications.

-Durable aluminum construction.
-Sealed ball bearing on the outward end and nylon sleeve on the inward end virtually drag-free operation.
-Will only fit aluminum handlebars.

-Levers are made of strong and durable forged aluminum.
-Black rubber grip pads for your fingers increase control in all weather.
-Most levers have brass bushings for smooth operation.
-Clean looking polished finish with a laser etched logo.
-Set includes brake and clutch levers.

-Tusk throttle cables are precisely made for optimal fitment.
-Heavy-duty nylon liner reduces friction for smooth operation and performance.
-Coil wound housing with a UV protected PVC cover ensures maximum flexibility and protection.

-Tusk clutch cables are precisely made for optimal fitment and durability.
-Heavy-duty nylon liner reduces friction for smooth operation and performance.
-Coil wound housing with a UV protected PVC cover ensures maximum flexibility and protection.

Universal motorcycle clutch lever and perch feature an over-sized thumb wheel with a locking ball bearing that allows the rider to adjust the clutch easily and precisely on the fly.
-Made of strong, lightweight cast aluminum.
-Motorcycle only.
-Available in silver, blue or red.
-Will not fit any machine with a hot start or decompression lever.

-Replacement clutch bracket that accepts OEM or OEM type clutch levers.
-Split perch design for easy mounting without having to remove any other bar mounted accessories such as wrap around hand guards or grips.
-Includes cable adjuster.

The ultimate standard in grip comfort and beauty. Anti-vibration, large pad design eliminates numbness and slipping for any sized hand. The extremely soft rubber will give you excellent control and maximum comfort. Handsomely detailed design adds beauty to any bike. Now you can have the stability of a lock-on grip with the comfort and quality of OURY.

-High quality tie rod ends designed to work with original equipment tie rods or Tusk Chromoly tie rods .
-Sold in pairs (1) L/H thread (1) R/H thread, enough to do one tie rod.
-Includes castle nuts and lock nuts.

These tie-rods ends are manufactured by the same company making the LSR ball joints. They bolt onto stock or LSR tie-rods and exeed the quality of the OEM tie-rod ends. (Sold as each)

-All Steering Stems are made from 4130 Chromoly Steel that offers superior strength over the OEM mild steel unit.
-They also feature the anti-Vibration clamp kit that help reduce rider fatigue.